GEOPRESS
GEOPRESS allows you to glue up to 20 samples simultaneously under individual weights of 360 g à 1,36 kg. It is the only press on the market which allows progressive, controlled temperature increase. GEOPRESS works at temperatures up to 110°C.
GEOTOME DUAL
GEOTOME DUAL has two working zones. On one side: cutting rock samples CUT / PREPARE / THIN. The cutting side can use all diamond discs to a diameter of 250mm. With its manual-movement longitudinal table, it allows you to cut rock and prepare the sample. Once the cube is glued to the thin section, it is possible thin it to a fixed or variable measurement thanks to the mobile or non-mobile vacuum vice which fixes onto the table. On the other side: the grinding of thin sections. GRINDING. The grinding area of GEOTOME DUAL allows you to pre-polish up to 4 thin sections simultaneously. They are held by a vacuum sample rack and are rectified thanks to a 175mm diameter diamond head cup wheel with resinoid, metallic or vitrified binder.
Mecatome T215
Robust and compact, the MECATOME T215 is an automatic micro-cutting machine. Its three programmable motorized axes make it a machine that adapts to all situations.
The MECATOME T215 offers numerous work parameters that allow to optimize the cutting of the most complex parts.
Accessories and options:
- Quick clamping vice left side for MECATOME T215 (ref. 51466)
- Quick clamping vice right side for MECATOME T215 (ref. 51465)
- Quick clamping vice for long sample for MECATOME T215 (ref. 51469)
- Sample chucks (to use only with a transversal table) for MECATOME T215 (ref. 51410)
- V shaped sample chuck for MECATOME T215 (ref. 51715)
- Vice chuck for longitudinal cuts for MECATOME T215 (ref. 51717)
- Orientable chuck for MECATOME T215 (ref. 51156) to be used with aluminium plates (ref. 51162 et 51163)
- Irregular shaped sample chuck for MECATOME T215 (ref. 51716)
- Chuck for small samples for MECATOME T215 (vice type) (ref. 51713)
- Chuck for cylindrical sample for MECATOME T215 (ref. 51714)
- Base cabinet for manual cutting machine pour MECATOME T215 (large model) (ref. 51470)
- Kopal holding (ref. 50616)
- Box of Kopal holders (ref. 50613)
- Option:Transversal table with motorized movement for MECATOME T215 (ref. 51461)
- Option: 25L recirculating tank for MECATOME T215 (ref. 51462)
- Option: Positioning laser for MECATOME T215 (ref. 51463)
- Option: Suction & extraction (ref. 51464)
Poly’Vac
Vacuum impregnation system. The vacuum mounting system provides for improved resin impregnation of porous materials. Its best use is with epoxy resins. The device can be manually operated or programmed and controlled through a touch screen with options for setting cycle time (timer from one minute to several hours) and various levels of vacuum. It includes a resin dispenser.
Pressure vessel for mounting under pressure
The vessel for mounting under pressure can dramatically improve the quality of acrylic mounts. Resin type KM becomes more transparent and resin type KM-U has reduced shrinkage. Additionally, improved resin impregnation of porous materials can be achieved.
MECATOME T265
Robust, the MECATOME T265 accepts cutting discs of Ø250 & Ø300mm. Its rotation speeds ranged from 1300 to 4000 RPM allow the use of metallic blades as resinoids. Its L-shaped table allows quick clamping of parts either horizontally or vertically.
Options and accessories:
- Magnetic filter (ref. 51271)
- Quick-release nut - Tool-less cut-off wheel change (ref. 51272)
- SUCTION AND EXTRACTION - Mist extraction with fluid recovery (ref. 51273)
- Base cabinet for manual cutting machine (small model) (ref. 51275)
- Left quick clamping vice (ref. 51280)
- Right quick clamping vice (ref. 51281)
- Stainless steel v-type moving jaw for clamping vice 45mm height (ref. 51282)
- Special fragile samples «delrin» thermoplastic moving jaw for clamping vice 45mm height (ref. 51283)
Diamond wire saw 3500 BASE
Fine cutting and absolute precision. With their stainless steel wire set with diamonds, the diamond wire saws cuts most materials. It is particularly recommended for cutting delicate samples such as silicon, glass or electronic components. Low speeds allow samples to be cut whilst protecting materials and preventing overheating. They ensure flat cut surfaces with clear edges, avoiding modifications to the structure on each side of the cut.
Diamond wire saw 3500 PREMIUM
Fine cutting and absolute precision. With their stainless steel wire set with diamonds, the diamond wire saws cuts most materials. It is particularly recommended for cutting delicate samples such as silicon, glass or electronic components. Low speeds allow samples to be cut whilst protecting materials and preventing overheating. They ensure flat cut surfaces with clear edges, avoiding modifications to the structure on each side of the cut.
Le Cube
The ideal solution for basic polishing operations. LE CUBE is a Ø 200 and 250mm manual polishing machine. Simple, reliable and sturdy, it is the ideal solution for laboratories, schools or research centres. Equipped with a frequency inverter, LE CUBE has a high-torque motor turning either clockwise or counter-clockwise. The polishing plate is equipped with two speed rotation settings (150 & 300 RPM). The multi-jet water spray ensures the optimum lubrication of the platen surface. With its removable platen the cleaning of the machine is very easy. LE CUBE is dust free thanks to the clear integrated hood. LE CUBE direct transmission on bearings confers an incomparable silence in use. LE CUBE can be used with any type of polishing surface: non-adhesive, adhesive, PRESI Reflex System and magnetic. No particular adaptation is required.